Category Archives: Working Process

‘Roman Remains’ – Stage 5

The casting of the ‘Maximus’ horse skull with Florence Bigglestone (@floss_art) continues, safely and with social distancing…

Part 1: Molds of Florence’s filligree designs are made in latex, and then reinforced with layers of plaster. Casting begins in plaster on the lower jaw mold.

Part 2: Test casts are taken of Florence’s filligree designs, with gold leaf added.

Part 3: Casting of the full skull continues, and the caps start to be joined together.

Part 4: Once the caps have been joined and cast, de-molding begins. Here, Florence can be seen chipping away the scrim that reinforces the joiner’s dogs.

Stay tuned for the next part of the mold making process!

‘Roman Remains’ – Stage 4, Major Update!

The casting of the ‘Maximus’ horse skull with Florence Bigglestone (@floss_art) continues, safely and with social distancing…

Part 1: The final caps of the piece mold for the skull are prepared for a vinamold pour – with the seams filled in with clay, vaseline & white spirit applied, joiner’s dogs fitted, and runners & risers added. The pour then takes place. Once the vinamold has set, de-molding begins.

Part 2: These photographs show how the piece mold has been constructed; in particular how the intricate shapes around the nose have been held in place (to create the needed grooves/hollows in negative). The vinamold caps are brushed down and cleaned, in preparation for test casts to be taken.

Part 3: While test casts are taken from the vinamold caps of the jaw, Florence creates a filligree of her own design, in clay, directly onto the face of the skull itself (which has previously been restored, repaired and reinforced). The filligree design is directly inspired by Roman chariots. Latex will later be used to take molds of the clay filligree.

Part 4: Test casts are taken from the jaw, to test the strength, thickness and finish – the plaster is combined with different types of fibres for each test cast. This process will inform the full cast of the skull. In these images, the test caps seen were cast with jute scrim.

Part 5: Another filligree, of Florence’s design, is created for the sides of the jaw – modelled directly in clay over the bone. Clay walls are then run around the areas on both the face of the skull and the jaw, for molds of the filligree to be taken in latex. After that, the latex is built up in several coats, and then reinforced with cotton scrim.

Stay tuned for the next part of the mold making process!

‘The Gull’ – Development

Work is going apace on ‘The Gull,’ sculpted in wire mesh & rebar, to be installed at Plas Newydd Tea Garden upon completion.

‘The Sculptor’ – Welsh Country Magazine Feature

The brilliant Sonia Goulding has written a feature article (for Welsh Country online magazine) on Nick, and how his sculpture practise has evolved. It’s difficult to discuss the world of sculpture and form using words, but Sonia has a gift with them – have a read!

A big thank you to both Sonia, and Welsh Country magazine.

“Nick continues to work in his quiet and determined way. Principled in his approach, and fiercely passionate, he has remained independent of means, and therefore of thought and artistic direction. His sculptures are deeply personal responses to the people and the landscapes which move him to creativity, the beauty and emotion he sees in shape and form made real, sculpture as a gracious, never-ending dance.”

Source: The Sculptor

‘Roman Remains’ – Stage 3

The casting of the ‘Maximus’ horse skull with Florence Bigglestone (@floss_art) continues, safely and with social distancing): The most fragile areas of the skull are reinforced with clay and vinymold, to allow for clean de-molding of the caps without damage to the skull itself. The caps are then prepared in plaster.

‘Roman Remains’ – Stage 2

The casting of the horse skull with fine artist Florence Bigglestone (@floss_art) continues: Following some subtle reinforcing and restoration, the skull (which has been named ‘Maximus’ – “Are you not entertained?”) has been clayed up, and the first caps of the piece mold are underway, in plaster.

We’ve been joined by Nick’s colleague, Tim Johnson, who has been assisting in documenting the process and working with Florence.

‘Roman Remains’– Casting with Florence Bigglestone

Nick is working with fine artist Florence Bigglestone (@floss_art) this month – safely and with social distancing – to restore and cast a horse’s skull. The cast skull, in plaster, will then be painted and embroidered by Florence to represent the history of chariot racing in Roman Chester. It will be exhibited in the Grosvenor Museum, Chester as part of an exhibition.

These photos show the beginning of the restoration and casting process.

You can check out more of Florence’s work on her Instagram.

‘The Sisters’ – Drone Photography

Photographs provided by Ian Carson, who kindly gave his consent for these photographs to be featured on the website. Thank you!

WhatsApp Image 2020-07-23 at 19.09.42WhatsApp Image 2020-07-23 at 19.09.42(1)WhatsApp Image 2020-07-23 at 19.09.42(2)


‘The Sisters’ – June Coronavirus Update

This gallery contains 29 photos.

‘The Sisters’ – Coronavirus Update

WhatsApp Image 2020-03-24 at 21.06.24

Installation of ‘The Sisters’ will resume when restrictions are lifted!
Best wishes, and keep safe! 🙏
– from the socially distancing sculptor.

This slideshow requires JavaScript.